New C200Hs Features - Omron SYSMAC C200HS Operation Manual

New C200HS Features

Name
SYSMAC Support Software Operation Manuals
Data Access Console Operation Guide
Printer Interface Unit Operation Guide
PROM Writer Operation Guide
Floppy Disk Interface Unit Operation Guide
Wired Remote I/O System Manual
(SYSMAC BUS)
Optical Remote I/O System Manual
(SYSMAC BUS)
PC Link System Manual
Host Link System Manual
(SYSMAC WAY)
SYSMAC NET Link Unit Operation Manual
SYSMAC LINK System Manual
High-speed Counter Unit Operation Manual
Position Control Unit Operation Manuals
Analog I/O Units Operation Guide
Analog Input Unit Operation Manual
Temperature Sensor Unit Operation Guide
ASCII Unit Operation Manual
ID Sensor Unit Operation Guide
Voice Unit Operation Manual
Fuzzy Logic Unit Operation Manual
Fuzzy Support Software Operation Manual
Temperature Control Unit Operation Manual
Heat/Cool Temperature Control Unit Operation
Manual
PID Control Unit Operation Manual
Cam Positioner Unit Operation Manual
1-8 New C200HS Features
6
Cat. No.
W247/W248
W173
W107
W155
W119
W120
W136
W135
W143
W114
W174
W141
NC111: W137
NC112: W128
NC211: W166
W127
W229
W124
W165
W153
W172
W208
W210
W225
W240
W241
W224
The C200HS CPUs (C200HS-CPU01-E, C200HS-CPU03-E, C200HS-
CPU21-E, C200HS-CPU23-E, C200HS-CPU31-E, and C200HS-CPU33-E)
have a number of new features that the C200H CPUs lacked. The new C200HS
features are described briefly in this section. The C200HS-CPU01-E, C200HS-
CPU21-E, C200HS-CPU31-E use an AC power supply and the C200HS-
CPU03-E, C200HS-CPU23-E, and C200HS-CPU33-E use DC.
In addition, the C200HS-CPU21-E, C200HS-CPU23-E, C200HS-CPU31-E,
and C200HS-CPU33-E CPUs have an RS-232C connector. The C200HS-
CPU31-E and C200HS-CPU33-E CPUs support the SYSMAC NET Link Unit
and SYSMAC LINK Unit.
Contents
Programming procedures for using the SSS
Data area monitoring and data modification
procedures for the Data Access Console
Procedures for interfacing a PC to a printer
Procedures for writing programs to EPROM chips
Procedures for interfacing PCs to floppy disk drives
Information on building a Wired Remote I/O System
to enable remote I/O capability
Information on building an Optical Remote I/O
System to enable remote I/O capability
Information on building a PC Link System to
automatically transfer data between PCs
Information on building a Host Link System to
manage PCs from a 'host' computer
Information on building a SYSMAC NET Link
System and thus create an optical LAN integrating
PCs with computers and other peripheral devices
Information on building a SYSMAC LINK System to
enable automatic data transfer, programming, and
programmed data transfer between the PCs in the
System
Information on High-speed Counter Unit
Information on Position Control Unit
Information on the C200H-AD001, C200H-DA001
Analog I/O Units
Information on the C200H-AD002 Analog Input Unit
Information on Temperature Sensor Unit
Information on ASCII Unit
Information on ID Sensor Unit
Information on Voice Unit
Information on Fuzzy Logic Unit
Information on the Fuzzy Support Software which
supports the Fuzzy Logic Units
Information on Temperature Control Unit
Information on Heating and Cooling Temperature
Control Unit
Information on PID Control Unit
Information on Cam Positioner Unit
Section 1-8