Cpu Components - Omron SYSMAC C200HS Operation Manual

CPU Components

2-1 CPU Components
! Caution Be sure to check the power supply used by the CPU. Absolutely do not provide an AC power sup-
ply to a DC-type CPU.
Battery/switch compartment
The backup lithium battery (C200H-BAT09)
and the DIP switch for setting C200HS opera-
tions are contained. An optional Memory Cas-
sette can also be mounted.
16
There are two groups of CPUs available, one that uses an AC power supply, and
one that uses a DC power supply. Select one of the models shown below accord-
ing to requirements of your control system.
CPU model
C200HS-CPU01-E/CPU21-E/CPU31-E
C200HS-CPU03-E/CPU23-E/CPU33-E
The CPU21-E, CPU23-E, CPU31-E, and CPU33-E CPUs have an RS-232C
connector. The CPU31-E and CPU33-E CPUs support the SYSMAC NET Link
Unit and SYSMAC LINK Unit.
The following diagram shows the main CPU components.
Indicators
Power supply voltage
100 to 120 VAC or 200 to 240 VAC
(voltage selector)
24 VDC
Power fuse (MF51NR, 5.2 dia. x 20 mm)
C200HS-CPU01-E: 2 A, 250 V
C200HS-CPU03-E: 5 A, 125 V
Removable terminal block
Cable connector for Peripheral Devices
(Peripheral port)
Section 2-1