Omron SYSMAC C200HS Operation Manual page 434

Host Link Commands
Batch Reading
Command Format
Response Format
1 0
x 10 x 10
@
Node no.
Parameters
11-3-34 ABORT –– XZ
Command Format
Data Break (Command)
The read information is specified one item at a time separated by a break code
(,). The maximum number of items that can be specified is 128. (When the PV of
a timer/counter is specified, however, the status of the Completion Flag is also
returned, and must therefore be counted as two items.)
The bit, word, and timer/counter status is read as a batch according to the read
information that was registered with QQ.
x 10
@
1
x 16
Q Q I R
Header Sub-header End code
code code
ON/
,
,
OFF
Bit data
ON/OFF
Read Data (Response)
Read data is returned according to the data format and the order in which read
information was registered using QQ. If "Completion Flag" has been specified,
then bit data (ON or OFF) is returned. If "Word" has been specified, then word
data is returned. If "PV" has been specified for timers/counters, however, then
the PV is returned following the Completion Flag.
Data Break (Response)
The break code (, ) is returned between sections that are read.
Aborts the Host Link operation that is currently being processed, and then en-
ables reception of the next command. The ABORT command does not receive a
response.
1 0
x 10
Q Q I
Node no. Header Sub-header
code code
ON/
0 3 2
x 16 x 10 x 10 x 10
OFF
Timer/Counter
If PV is specified the sta-
tus of the Completion Flag
is also returned.
3 2
, x 16 x 16 x 16
Word data
IR, SR, LR, HR,
AR, DM
1 0
x 10 x 10
@ X Z
Node no. Header
code
Section 11-3
: ↵
R
FCS Terminator
1 0
x 10
,
Data break
:
1 0
x 16
FCS Terminator
: ↵
FCS Terminator
↵
429