Omron SYSMAC C200HS Operation Manual page 432

Host Link Commands
Parameters
11-3-31 PROGRAM WRITE –– WP
Command Format
Response Format
Parameters
11-3-32 I/O TABLE GENERATE –– MI
Command Format
Response Format
11-3-33 COMPOUND COMMAND –– QQ
Registering Read Information
Program (Response)
The program is read from the entire program area.
Note To stop this operation in progress, execute the ABORT (XZ) command.
Writes to the PC user's program area the machine language (object code) pro-
gram transmitted from the host computer. The contents are written as a block,
from the beginning.
1
x 10 x 10
@
Node no.
@ x 10
Program ((Command)
Program data up to the maximum memory size.
Corrects the registered I/O table to match the actual I/O table.
@
x 10
@
Registers at the PC all of the bits, words, and timers/counters that are to be read,
and reads the status of all of them as a batch.
Register the information on all of the bits, words, and timers/counters that are to
be read.
0 1 0
x 16 x 16
W P
Header 1 byte
code
Program (Up to maximum memory size)
1 0 1
x 10 W P x 16
Node no. Header End code
code
1 0
x 10 x 10
M I
Node no. Header
code
1 0 1
x 10 x 16
M I
Node no. Header End code
code
Section 11-3
:
FCS Terminator
: ↵
0
x 16
FCS Terminator
: ↵
FCS Terminator
: ↵
0
x 16
FCS Terminator
↵
427