Omron SYSMAC C200HS Operation Manual page 373

Monitoring Operation and Modifying Data
7-1-14 Expansion Instruction Function Code Assignments
Key Sequence
Example
This operation is used to read or change the function codes assigned to expan-
sion instructions. There are 18 function codes that can be assigned to expansion
instructions: 17, 18, 19, 47, 48, 60 to 69, and 87 to 89. More than one function
code can be assigned to an expansion instruction.
Note Function Code Assignments can be read in any mode, but can be changed in
PROGRAM mode only.
00000
INST TBL
FUN17:ASFT
INST TBL
FUN18:SRCH
INST TBL
FUN17:ASFT
INST TBL
FUN18:SRCH
INST TBL
FUN18:SRCH→????
INST TBL
FUN18:SRCH→MCMP
INST TBL
FUN18:SRCH→PID
INST TBL
FUN18:PID
D0002
0123
Press CLR to bring up the initial
display.
READ
Press EXT to begin displaying function
code assignments.
READ
Press the Up and Down Arrow keys to
scroll through the function code
assignments.
READ
The Up Arrow key displays function
codes in ascending order:
17, 18, ... , 89, 17, 18, ...
READ The Down Arrow key displays function
codes in descending order:
17, 89, 88, ... 17, 89, ...
CHG?
Press CHG to change the displayed
function code assignment.
CHG?
Press the Up and Down Arrow keys to
scroll through the instructions.
CHG?
READ
Press WRITE to enter the change into
memory.
Press CLR to return to the initial
display.
Section 7-1
365