Omron SYSMAC C200HS Operation Manual page 377

Monitoring Operation and Modifying Data
All bits from SR 27700 through SR 27909 will be turned OFF when AR 0708 is
turned ON. Expansion keyboard mapping inputs are disabled when AR 0708 is
ON.
In addition to the keyboard mapping function, expansion TERMINAL mode al-
lows messages output by MSG(46) and LMSG(47) to be displayed on the Pro-
gramming Console. These messages will be erased if the Programming Con-
sole is switch back to CONSOLE mode.
The following diagram shows the correspondence between the position of Pro-
gramming Console keys and bits in the SR Area. Each key corresponds 1 to 1
with a bit. Shifted inputs are not recognized. Keys 0 to 15 correspond to bits
SR 27700 to SR 27715, keys 16 to 31 correspond to bits SR 27800 to SR 27815,
and keys 32 to 41 correspond to bits SR 27900 to SR 27909.
0 1
FUN key
6 7
12 13
18 19
24 25
30 31
36 37
The following table shows the correspondence between the actual Program-
ming Console keys and bits SR 27700 to SR 27909.
SR word Bit
277 00
01
02
03
04
05
06
07
08
09
10
11
2 3 4 5
8 9 10 11
14 15 16 17
20 21 22 23
26 27 28 29
32 33 34 35
38 39 40 41
Corresponding key(s)
Section 7-1
FUN
*1
*2
369