Controller Setting Preparations; Creation Of A New Project - Omron CK3W-AX2323 Series Startup Manual

3-2

Controller Setting Preparations

Perform the Controller setting preparations.
Install the Power PMAC IDE on the PC beforehand.
3-2-1

Creation of a New Project

Follow the procedure below to create a new project.
1
Connect the Controller and computer
with an Ethernet cable.
2
Turn ON the power supply to the Con-
troller.
3
Start up Power PMAC IDE.
•
If a dialog for checking access rights
is displayed at the time of startup, se-
lect the option for starting up.
4
The Communication screen is dis-
played, so specify the IP address of the
Controller to be connected to, and click
the Connect button.
•
The default IP address for the Con-
troller is "192.168.0.200".
•
If necessary, change the Windows IP
address to "192.168.0.X".
5
Power PMAC IDE starts up, and the
Controller will come online.
CK3M/CK5M Series Startup Guide DirectPWM Interface (O047)
3 DirectPWM Interface Connection Procedure
3
3-3