Configuration List - Mitsubishi Electric QD75P1N User Manual

2 SYSTEM CONFIGURATION

2.2 Configuration list

No. Part name
1 Positioning module
2 GX Configurator-QP
3 Personal computer
4 RS-232 cable
5 USB cable
6 Drive unit
Manual pulse
7
generator
Connection cable
(For connecting
8
between the QD75
and the drive unit)
The positioning system using the QD75 is configured of the following devices.
Type
QD75P1N
QD75P2N
QD75P4N
QD75D1N
QD75D2N
QD75D4N
QD75P1
QD75P2
Refer to Appendix 1.2 for differences between QD75P N/QD75D N and
QD75P4
QD75P /QD75D .
QD75D1
QD75D2
QD75D4
SW D5C-
Refer to GX Configurator-QP Operating Manual for details.
QD75P-E
Personal
(Prepared by user)
computer which
supports
Refer to GX Configurator-QP Operating Manual for details.
®
Windows .
(Prepared by user)
An RS-232 cable is needed for connecting the CPU module with a
QC30R2
personal computer.
For details, refer to GX Configurator-QP Operating Manual.
(Prepared by user)
A USB cable is needed for connecting the CPU module with a personal
–
computer.
For details, refer to GX Configurator-QP Operating Manual.
– (Prepared by user)
(Prepared by user)
–
Recommended: MR-HDP01 (Mitsubishi Electric)
(Prepared by user)
Cables are needed to connect the QD75 with the drive unit, manual pulse
– generator, and input devices in the machine system.
(Prepare them referring to the manuals for the connected devices and
information given in 3.4.2 of this manual.)
QD75
No. of control axes
P: Open collector output system
D: Differential driver output system
2 - 4
MELSEC-Q
Remarks