Mitsubishi Electric QD75P1N User Manual page 604

12 CONTROL SUB FUNCTIONS
Setting item
External command
Pr.42
function selection
External command
Cd.8
valid
Refer to Section 5.7 "List of control data" for details on the setting details.
Example
[4] Setting the skip function using an external command signal
The skip function can also be executed using an "external command signal".
The following shows the settings and sequence program example for skipping
the control being executed in axis 1 using an "external command signal".
(1) Set the following data to execute the skip function using an external
command signal.
(The setting is carried out using the sequence program shown below in
section (2)).
Setting
value
3 Set "3: Skip request".
1 Set "1: Validate external command".
(2) Add the following sequence program to the control program, and write it to
the CPU module.
Skip function
selection command
Input external command signal
Setting details
TOP H0
TOP H0
12 - 80
MELSEC-Q
Buffer memory address
Axis Axis
1 2
62 212 362 512
1505 1605 1705 1805
K62 K3 K1
<Select skip request>
Skip request
K1505 K1 K1
<Set external command valid>
External command valid
Axis Axis
3 4