Mitsubishi Electric QD75P1N User Manual page 55

2 SYSTEM CONFIGURATION
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Q02PH/Q06PHCPU
Q12PH/Q25PHCPU
Q02U/Q03UD/
Q04UDH/
Q06UDHCPU
Q13UDH/Q26UDH/
Q03UDE/Q04UDEH/
Q06UDEH/Q13UDEH/
Q26UDEHCPU
Q00U/Q00UJ/Q01U/Q
10UDH/Q20UDH/
Q10UDEH/
Q20UDEHCPU
CPU modules other than above
For use on MELSECNET/H remote I/O
station
(3) Supported software packages
The following table lists the compatibility between the systems using the QD75 and
the software packages. GX Developer or GX Works2 is required for use of the
QD75.
GX Developer
Single CPU
Version 7 or later
system
Multiple CPU
Version 8 or later
system
Single CPU
Version 4 or later
system
Multiple CPU
Version 6 or later
system
Single CPU
system
Version 8.68W or
Multiple CPU
system
Single CPU
system
Version 7.10L or
Multiple CPU
system
Single CPU
system
Version 8.48A or
Multiple CPU
system
Single CPU
system
Version 8.68W or
Multiple CPU
system
Single CPU
system
Version 8.76E or
Multiple CPU
system
Not supported
Version 6 or later
1: To use the QD75P N/QD75D N with GX Configurator-QP, select the
QD75P /QD75D
same manner as the QD75P /QD75D ; the setting ranges are the same. Therefore, a
speed exceeding 1000000pulse/s cannot be set in some items. (Refer to Appendix 1.2)
POINT
When using GX Works2, refer to the following:

GX Works2 Version 1 Operating Manual (Common)

GX Works2 Version 1 Operating Manual (Intelligent Function Module)
Software version
GX Configurator-QP
Version 2.10L or later
Version 2.00A or later
Version 2.29F or later
later
Version 2.13P or later
later
Version 2.25B or later
later
Version 2.29F or later
later
Version 2.32J or later
later
Not supported
Version 2.00A or later
as the model name. The QD75P N/QD75D N can be used in the
2 - 7
MELSEC-Q
*1
GX Works2
Refer to GX Works2
Version 1 Operating
Manual (Common).