Mitsubishi Electric QD75P1N User Manual page 792

APPENDICES
Clock data setting (hour)
Clock data setting (minute, second)
Clock data writing
Target axis
Positioning data No.
Write pattern
Read/write request
Read/write positioning data I/F
Flash ROM write request
Parameter initialization request
Positioning start No.
Axis error reset
Restart command
M code OFF request
New current value
New speed value
Speed change request
Positioning operation speed override
JOG speed
Inching movement amount
Speed-position switching enable flag
Speed-position switching control movement amount change register
Position-speed switching enable flag
Position-speed switching control speed change register
Target position change request flag
Target position change value (new address)
Target position change value (new speed)
ABS direction in degrees
Manual pulse generator enable flag
Manual pulse generator 1 pulse input magnification
OPR request flag OFF request
External start valid (QD75: Cd.8 External command valid)
Control data
Item
Appendix - 76
MELSEC-Q
A1SD75 QD75
Cd.1 –
Cd.2 –
Cd.3 –
Cd.4 –
Cd.5 –
Cd.6 –
Cd.7 –
Cd.8 –
Cd.9 Cd.1
Cd.10 Cd.2
Cd.11 Cd.3
Cd.12 Cd.5
Cd.13 Cd.6
Cd.14 Cd.7
Cd.15 Cd.9
Cd.16 Cd.14
Cd.17 Cd.15
Cd.18 Cd.13
Cd.19 Cd.17
– Cd.16
Cd.20 Cd.24
Cd.21 Cd.23
– Cd.26
– Cd.25
– Cd.29
– Cd.27
– Cd.28
– Cd.40
Cd.22 Cd.21
Cd.23 Cd.20
Cd.24 Cd.19
Cd.25 Cd.8