Mitsubishi Electric QD75P1N User Manual page 661

14 DEDICATED INSTRUCTIONS
[Program example]
[Program example for use when dedicated instruction is not used]
Program used to write the parameters and positioning data stored in the buffer
memory to the flash ROM when X3D is turned ON.
(1) Flash ROM write program
(2) Flash ROM write program (when the dedicated instruction is not used)
14 - 19
MELSEC-Q
<Flash ROM write command pulse>
<Flash ROM write command hold>
<PLC READY output to QD75 standby>
<Flash ROM write execution>
<Flash ROM write command storage OFF>
<Flash ROM write command pulse>
<Flash ROM write command hold>
<PLC READY output to QD75 standby>
<Flash ROM write execution>
<Flash ROM write command storage OFF>