Mitsubishi Electric QD75P1N User Manual page 799

APPENDICES
Setting positioning data
(1) Operating procedure
1. Open the "Parameter" window.
Project window
"Positioning_Axis_# _Data"
2. Configure settings.
Double-click the setting-target item and select or enter a value.
 Items with a pull-down list
Double-click the item and select an item in the displayed pull-down list.

Items without a pull-down list
Double-click the item and enter a value.
POINT
In the default status, the data displayed on "Positioning_Axis_# _Data" are only No. 1
to No. 100 of positioning data. To display the data No. 101 and later, change the
display range under "Display Specification of Positioning data".
[Tool] [Options...]
Positioning"
(Example) To display No.1 to No. 120 of positioning data
[Intelligent Function Module]
[Intelligent Function Module]
Appendix - 83
MELSEC-Q
Module name
"QD75/LD75 Type