Mitsubishi Electric QD75P1N User Manual page 808

APPENDICES
Current feed value
Axis feed speed
Axis operation status
Movement amount after near-point dog ON
Torque limitation stored value
Status command in-position flag
Status OPR request flag
Status OPR complete flag
External I/O signal lower limit
External I/O signal upper limit
External I/O signal zero signal
External I/O signal near-point dog signal
External I/O signal deviation counter clear
Current feed value
Axis feed speed
Axis operation status
Forward JOG start
Reverse JOG start
JOG speed
JOG speed limit value
JOG acceleration time
JOG deceleration time
Manual pulse generator enable flag
Manual pulse generator input selection
Manual pulse generator 1 pulse input
magnification
• For "Operation monitor (OPR monitor)":
Monitor item
• For "Operation monitor (JOG/manual pulse)":
Monitor item
3) Click the OK button to close the "Monitor Item Selection" window.
The selected items are reflected to the "Axis Monitor" window.
Appendix - 92
Symbol of reference buffer memory
Md.20
Md.28
Md.26
Md.34
Md.35
Md.31
Md.30
Symbol of reference buffer memory
or device No. of the output signal
Axis 1 Axis 2 Axis 3
Md.20
Md.28
Md.26
Y8 YA YC
Y9 YB YD
Cd.17
Pr.31
Pr.32
Pr.33
Cd.21
Pr.24
Cd.20
MELSEC-Q
Reference
Section 5.6.2
Reference
Axis 4
Section 5.6.2
YE
Section 3.3.3
YF
Section 5.7.2
Section 5.2.4
Section 5.7.2
Section 5.2.3
Section 5.7.2