Deleting A Card; Deleting Port Parameters - Alcatel-Lucent 7750 Configuration Manual

Deleting a Card

In order to delete the card type provisioned for a specific slot, you must shutdown existing port
configurations and shutdown and remove all MDA or CMA configurations. For 7750 SR-c12/c4
systems, after removing MDA configurations, you may shutdown and remove the MCM from
service before modifying the card.
Use the following CLI syntax to delete a card provisioned for a specific slot:
CLI Syntax: config> port port-id
CLI Syntax: config> card slot-number

Deleting Port Parameters

Use the following CLI syntax to delete a port provisioned for a specific card:
CLI Syntax: config>port port-id
Use the following CLI syntax to delete a port provisioned for a specific card or CMA:
CLI Syntax: config>port port-id
7750 SR Interface Configuration Guide
shutdown
card-type card-type
mcm mcm-number (for 7750 SR-c12/c4 only)
no mcm-type mcm-type
no shutdown
mda mda-number
no mda-type mda-type
no shutdown
shutdown
no port port-id
shutdown
Interface Configuration
Page 261