Alcatel-Lucent 7750 Configuration Manual page 675

TC Alarm State
Last Unknown
VPI/VCI
Ingress CBR
Egress CBR
Ingress RT-VBR
Egress RT-VBR
Ingress NRT-VBR
Egress NRT-VBR
Ingress UBR
Egress UBR
Ingress Total
ATM Link Band-
width
Shaped Bandwidth
HEC Errors
(Dropped)
HEC Errors
(Fixed)
Sample Output
7750 SR Interface Configuration Guide
Label
Displays notifications that are generated when the ATM interface indicates
that the TC sublayer is currently in the Loss of Cell Delineation (LCD)
defect maintenance state or when the TC sublayer is currently not in the
Loss of Cell Delineation (LCD) defect maintenance state.
Indicates the last unknown VPI/VCI that was received on this interface.
Indicates the total CBR bandwidth consumed on this interface in the ingress
direction.
Indicates the total CBR bandwidth consumed on this interface in the egress
direction.
Indicates the total real-time variable bit rate (rt-VBR) bandwidth consumed
on this interface in the ingress direction.
Indicates the total real-time variable bit rate (rt-VBR) bandwidth consumed
on this interface in the egress direction.
Indicates the total non-real-time variable bit rate (nrt-VBR) bandwidth
consumed on this interface in the ingress direction.
Indicates the total non-real-time variable bit rate (nrt-VBR) bandwidth
consumed on this interface in the egress direction.
Indicates the total unspecified bit rate (UBR) bandwidth consumed on this
interface in the ingress direction.
Indicates the total unspecified bit rate (UBR) bandwidth consumed on this
interface in the egress direction.
Indicates the number of valid ATM cells received by the ATM interface
including both CLP=0 and CLP=1 cells. If traffic policing is implemented,
then cells are counted prior to the application of traffic policing.
Indicates the total ATM link bandwidth accepted on this interface.
Indicates the total shaped bandwidth consumed on this interface in the
egress direction.
Indicates the number of cells with uncorrectable HEC errors on this
interface.
Indicates the number of fixed HEC errors on this interface.
Interface Configuration
Description (Continued)
Page 675