Alcatel-Lucent 7750 Configuration Manual page 318

Interfaces
Description The ingress node within the named-pool-mode context is used to contain the ingress named-pool-policy con-
figuration. Enter the ingress node when defining or removing the MDA or port level ingress named pool pol-
icy.
egress
Syntax egress
Context config>card>mda>named-pool-mode
config>port>named-pool-mode
Description The egress node within the named-pool-mode context is used to contain the egress named-pool-policy con-
figuration. Enter the egress node when defining or removing the MDA or port level egress named pool pol-
icy.
named-pool-policy
Syntax named-pool-policy policy-name
no named-pool-policy
Context config>card>mda>named-pool-mode>ingress
config>card>mda>named-pool-mode>egress
config>port>named-pool-mode>ingress
config>port>named-pool-mode>egress
Description The named-pool-policy command is used to associate a named pool policy with an MDA or port ingress or
egress context. The policy governs the way that named pools are created at the MDA or port level. The pol-
icy may be applied regardless of whether the IOM is in named pool mode; however, a named pool policy to
an MDA or port to a card that is not on named pool mode will be ignored. Pools may not be created due to
insufficient resources or pool name collisions. Pool name collisions are allowed. The name check is per-
formed independently between ingress and egress. A port on ingress may have a named pool defined that is
also on the egress side at the MDA level. Multiple ports on the same MDA may have the same policy or the
same named pools defined. Ports on the same MDA may also have different named pool policies defined.
The no named-pool-policy command removes any existing policy associated with the MDA or port.
Parameters policy-name — The defined policy-name must be an existing named pool policy on the system. If policy-
name does not exist, the named-pool-policy command will fail. If another named pool policy is cur-
rently associated, it will continue to be associated on the MDA or port. If the policy-name does exist,
the pools within the current policy (if a policy is currently associated) will be removed and the pools
defined within the new policy will be created. Queues on the port or MDA will be moved to the new
pools. If a pool being used by a queue existed on the previous policy, but not in the new policy, the
queue is moved to the appropriate default pool and marked as 'pool-orphaned'. The policy-name may
be changed at any time.
Values
Default
Page 318
Any existing Named Pool Policy
None
7750 SR Interface Configuration Guide