Alcatel-Lucent 7750 Configuration Manual page 614

Interfaces
pools
Syntax pools mda-id [/port] [access-app [pool-name | service service-id]] | queue-group queue-group-
name]]
pools mda-id [/port] [network-app [pool-name |queue-group queue-group-name]]
pools mda-id [/port] [direction [pool-name |service service-id| queue-group queue-group-name]]
Context show
Description
This command displays pool information.
Parameters mda-id[/port] — Displays the pool information of the specified MDA and port.
access-app pool-name — Displays the pool information of the specified QoS policy.
Values
service service-id — Displays pool information for the specified service.
Values
queue-group queue-group-name — Display information for the specified queue group.
direction — Specifies to display information for the ingress or egress direction.
Values
Output Show Pool Output — The following table describes show pool output fields.
Type
ID
Application/Type
Pool Name
Resv CBS
Utilization
State
Start-Avg
Max-Avg
Time Avg Factor
Page 614
access-ingress, access-egress
1 — 2147483647
ingress, egress
Label
Specifies the pool type.
Specifies the card/mda or card/MDA/port designation.
Specifies the nature of usage the pool would be used for. The pools could be
used for access or network traffic at either ingress or egress.
Specifies the name of the pool being used.
Specifies the percentage of pool size reserved for CBS.
Specifies the type of the slope policy.
The administrative status of the port.
Specifies the percentage of the buffer utilized after which the drop
probability starts to rise above 0.
Specifies the percentage of the buffer utilized after which the drop
probability is 100 percent. This implies that all packets beyond this point
will be dropped.
Specifies the time average factor the weighting between the previous shared
buffer average utilization result and the new shared buffer utilization in
determining the new shared buffer average utilization.
Description
7750 SR Interface Configuration Guide