Alcatel-Lucent 7750 Configuration Manual page 391

Parameters class-id — Specifies the class identifier of the low burst max class for the shaper.
Values
rate {kilobits-per-second | max} — Specifies the rate limit for the secondary shaper.
Values
monitor-threshold size-in-kilobytes — Specifies the monitor threshold for the secondary shaper.
Values
low-burst-max-class
Syntax low-burst-max-class class
no low-burst-max-class
Context config>port>ethernet>egress>exp-secondary-shaper
Description This command specifies the class to associate with the Ethernet egress expanded secondary shaper.
The no form of the command returns the class number value for the Ethernet egress expanded secondary
shaper to the default value.
Parameters class — Specifies the class number of the class for the secondary shaper.
Values
vport
Syntax vport name [create]
no vport name
Context config>port>ethernet>access>egress
config>port>sonet-sdh>path>access>egress
Description This command configures a scheduling node, referred to as virtual port, within the context of an egress
Ethernet port. The Vport scheduler operates either like a port scheduler with the difference that multiple
Vport objects can be configured on the egress context of an Ethernet port, or it can be an aggregate rate
when an egress port-scheduler policy is applied to the port.
The Vport is always configured at the port level even when a port is a member of a LAG.
When a a port scheduler policy is applied to a Vport the following command is used:
configure>port>ethernet>acess>egress>vport>port-scheduler-policy port-scheduler-policy-name
The CLI will not allow the user to apply a port scheduler policy to a Vport if one has been applied to the
port. Conversely, the CLI will not allow the user to apply a port scheduler policy to the egress of an Ethernet
port if one has been applied to any Vport defined on the access egress context of this port. The agg-rate,
along with an egress port-scheduler, can be used to ensure that a given Vport does not oversubscribe the
port's rate.
7750 SR Interface Configuration Guide
1— 32
max, 1— 10000000
0— 8190
1— 8
Interface Configuration
Page 391