Alcatel-Lucent 7750 Configuration Manual page 383

limit-unused-bandwidth
Syntax [no] limit-unused-bandwidth
Context config>port>ethernet>access>egr>qgrp>agg-rate
config>port>ethernet>access>egr>vport>agg-rate
config>port>ethernet>network>egr>qgrp>agg-rate
config>port>sonet-sdh>path>access>egress>vport
Description
This command is used to enable (or disable) aggregate rate overrun protection on the agg-rate context.
queue-frame-based-accounting
Syntax [no] queue-frame-based-accounting
Context config>port>ethernet>access>egr>qgrp>agg-rate
config>port>ethernet>access>egr>vport>agg-rate
config>port>ethernet>network>egr>qgrp>agg-rate
config>port>sonet-sdh>path>access>egress>vport
Description
This command is used to enabled (or disable) frame based accounting on all queues associated with the agg-
rate context. Only supported on Ethernet ports. Not supported on HSMDA Ethernet ports.
host-match
Syntax host-match dest destination-string [create]
no host-match dest destination-string
Context config>port>ethernet>access>egr>qgrp
Description This command configures host matching for the Ethernet port egress queue-group.
The no form of the command removes host matching for the Ethernet port egress queue-group.
Parameters
dest destination-string — Specify a host match destination string up to 32 characters in length.
create — Keyword used to create the host match. The create keyword requirement can be enabled/disabled
in the environment>create context.
queue-overrides
Syntax queue-overrides
Context config>port>ethernet>access>egr>qgrp
config>port>ethernet>access>ing>qgrp
config>port>ethernet>network>egr>qgrp
7750 SR Interface Configuration Guide
Interface Configuration
Page 383