Alcatel-Lucent 7750 Configuration Manual page 652

Service router
Hide thumbs Also See for 7750:
Table of Contents

Advertisement

Interfaces
Unknown Proto
Discards Input/
Output
Errors
LLF Admin State
LLF Oper State
Rx S1 Byte
Tx S1 Byte
Tx DUS/DNU
Sample Output
A:ALA-251# show port 1/2/1 detail
===============================================================================
Ethernet Interface
===============================================================================
Description
Interface
Link-level
Admin State
Oper State
Physical Link
Single Fiber Mode
IfIndex
Last State Change
Last Cleared Time
Phys State Chng Cnt:
Enabled
Phys State Chng Cnt: 3Configured Mode
Dot1Q Ethertype
PBB Ethertype
Ing. Pool % Rate
Net. Egr. Queue Pol: default
Egr. Sched. Pol
Auto-negotiate
Accounting Policy
Egress Rate
Load-balance-algo
Page 652
Label
For packet-oriented interfaces, the number of packets received
through the interface which were discarded because of an unknown or
unsupported protocol. For character-oriented or fixed-length
interfaces that support protocol multiplexing the number of
transmission units received via the interface which were discarded
because of an unknown or unsupported protocol. For any interface
that does not support protocol multiplexing, this counter will always
be 0. For ATM, this field displays cells discarded on an invalid vpi/
vci. Unknown proto discards do not show up in the packet counts.
For ATM, this field displays the number of cells discarded due to
uncorrectable HEC errors. Errors do not show up in the raw cell
counts.
Displays the Link Loss Forwarding administrative state.
Displays the Link Loss Forwarding operational state.
Displays the received S1 byte and its decoded QL value.
Displays the transmitted S1 byte and its decoded QL value.
Displays whether the QL value is forcibly set to QL-DUS/QL-DNU.
: 10/100 Ethernet TX
: 1/2/1
: Ethernet
: up
: down
: No
: No
: 37781504
: 01/03/2008 15:17:00
: 01/03/2008 15:17:01
Last Cleared Time
: 0x8100
: 0x88e7
: 100
: n/a
: false
: None
: Default
: default
Description (Continued)
Oper Speed
Config Speed
Oper Duplex
Config Duplex
MTU
Clock Mode
Hold time up
Hold time down
: N/A
: network
QinQ Ethertype
Egr. Pool % Rate : 100
MDI/MDX
Collect-stats
Ingress Rate
LACP Tunnel
7750 SR Interface Configuration Guide
: 0 mbps
: 100 mbps
: N/A
: full
: 1514
:synchronous
: 0 seconds
: 0 seconds
DDM Events
Encap Type
: null
: 0x8100
: unknown
: Disabled
: Default
: Disabled
:

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents