Maximizing Bandwidth Use - Alcatel-Lucent 7750 Configuration Manual

Interface Configuration

Maximizing Bandwidth Use

Once ports are preprovisioned, Link Aggregation Groups (LAGs), multilink-bundles (IMA), or
Bundle Protection Groups (for example IMA BPGrps), can be configured to increase the
bandwidth available between two nodes. All physical links or channels in a given LAG combine
to form one logical connection. A LAG also provides redundancy in case one or more links that
participate in the LAG fail. For command syntax, see Configuring Multilink PPP Bundles on page
243. To configure channelized port for TDM, refer to section Configuring Channelized Ports on
page 202. To configure channelized port for Sonet/SDH high speed channels (ASAP MDAs only),
refer to Configuring SONET/SDH Port Parameters on page 199.
7750 SR Interface Configuration Guide Page 181