Alcatel-Lucent 7750 Configuration Manual page 409

Service router
Hide thumbs Also See for 7750:
Table of Contents

Advertisement

critical-event
Syntax
critical-event local-port-action {log-only | out-of-service}
Context
config>port>ethernet>efm-oam>peer-rdi-rx
Description
This command defines how to react to the reception of a critical event Flag field set in the informational
OAMPDU.
Default
critical-event local-port-action out-of-service
Parameters
local-port-action — Defines whether or not the local port will be affected when a critical event is received
from a peer.
log-only — Keyword that prevents the port from being affected when the local peer receives a critical event.
The critical event will be logged but the port will remain operational.
out-of-service — Keyword that causes the port to enter a non-operation down state with a port state of link
up. The error will be logged upon reception of critical event. The port will not be available to service
data but will continue to carry Link OAM traffic to ensure the link is monitored.
dying-gasp
Syntax
dying-gasp local-port-action {log-only | out-of-service}
Context
config>port>ethernet>efm-oam>peer-rdi-rx
Description
This command defines how to react to the reception of a dying gasp Flag field set in the informational
OAMPDU.
Default
dying-gasp local-port-action out-of-service
Parameters
local-port-action — Defines whether or not the local port will be affected when a dying gasp event is
received from a peer.
log-only — Keyword that prevents the port from being affected when the local peer receives a dying gasp.
The dying gasp will be logged but the port will remain operational.
out-of-service — Keyword that causes the port to enter a non-operation down state with a port state of link
up. The error will be logged upon reception of dying gasp. The port will not be available to service data
but will continue to carry Link OAM traffic to ensure the link is monitored.
event-notification
Syntax
event-notification local-port-action {log-only | out-of-service}
Context
config>port>ethernet>efm-oam>peer-rdi-rx
Description
This command defines how to react to the reception of event TLVs contained in the Event Notification
OAMPDU. The event TLVs contained in the event notification OAMPDU will be analyzed to determine if
the peer has crossed the error threshold for the window. The analysis does not consider any local signal
7750 SR Interface Configuration Guide
Interface Configuration
Page 409

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents