Alcatel-Lucent 7750 Configuration Manual page 495

The no form of this command disables transmission of the specified message or all messages.
Default no mdl-transmit
Parameters path — Specify the MDL path message.
idle-signal — Specify the MDL idle signal message.
test-signal — Specify the MDL test signal message.
remote-loop-respond
Syntax [no] remote-loop-respond
Context config>port>tdm>ds1
Description When enabled, the channel responds to requests for remote loopbacks.
Default no remote-loop-respond — The port will not respond.
report-alarm
Syntax [no] report-alarm [ais] [los] [oof] [rai] [looped] [ber-sd] [ber-sf]
Context config>port>tdm>ds1
config>port>tdm>e1
Description This command enables logging of DS-1/DS-3 or E-1/E-3 alarms for DS-1/DS-3 or E-1/E-3 ports or chan-
nels.
The no form of this command disables logging of the specified alarms.
Parameters ais — Reports alarm indication signal errors. When configured, ais alarms are not raised and cleared.
Default
los — Reports loss of signal errors. When configured, los traps are not raised and cleared.
Default
oof — Reports out-of-frame errors. When configured, oof alarms are not raised and cleared.
Default
rai — Reports resource availability indicator events. When configured, rai events are not raised and
cleared.
Default
looped — Reports looped packets errors.
looped alarms are not issuedlof — Reports loss of frame errors. When configured, lof traps are not raised
and cleared.
Default
7750 SR Interface Configuration Guide
ais alarms are issued
los traps are issued.
oof alarms are not issued.
rai alarms are not issued
lof traps are issued
Interface Configuration
Page 495