Alcatel-Lucent 7750 Configuration Manual page 382

Interfaces
A port queue group cannot be removed from the port when a forwarding class is currently redirected to the
group. All forwarding class redirections must first be removed prior to removing the queue group.
Default
none
Parameters group-name — The group-name parameter is required when executing the port queue-group command. The
specified group-name must exist as an ingress or egress queue group template depending on the ingress
or egress context of the port queue group. Only a single queue group may be created on an ingress port.
Multiple queue groups may be created on an egress port.
instance-id — specifies the identification of a specific instance of the queue-group.
Values
create — Keyword used to associate the queue group. The create keyword requirement can be enabled/
disabled in the environment>create context.
agg-rate
Syntax [no] agg-rate
Context config>port>ethernet>access>egr>qgrp
config>port>ethernet>access>egr>vport
config>port>ethernet>network>egr>qgrp
Description This command is used to control an HQoS aggregate rate limit. It is used in conjunction with the following
parameter commands: rate, limit-unused-bandwidth, and queue-frame-based-accounting.
When specified under a VPORT, the agg-rate rate, port-scheduler-policy and scheduler-policy commands
are mutually exclusive. Changing between the use of a scheduler policy and the use of an agg-rate/port-
scheduler-policy involves removing the existing command and applying the new command.
rate
Syntax rate {max | rate}
no rate
Context config>port>ethernet>access>egr>qgrp>agg-rate
config>port>ethernet>access>egr>vport>agg-rate
config>port>ethernet>network>egr>qgrp>agg-rate
This command defines the enforced aggregate rate for all queues associated with the agg-rate
Description
context. A rate must be specified for the agg-rate context to be considered to be active on the con-
text's object (SAP, subscriber, VPORT etc.).
Parameters rate — Specifies the rate limit for the VPORT.
Values
Page 382
1 — 40960
max, 1— 800000000, max
7750 SR Interface Configuration Guide