Alcatel-Lucent 7750 Configuration Manual page 626

Interfaces
APS Show Commands
aps
Syntax aps [aps-id] [detail]
Context show
Description This command displays Automated Protection Switching (APS) information.
Parameters
aps-id — Displays information for the specified APS group ID.
Values
detail — Displays detailed APS information.
Output APS Output — The following table describes APS output fields.
Interface
Admin State
Oper State
MC-CTL State
Work Circuit
Prot Circuit
Active Circuit
Tx/Rx K1 Byte
Group Id
Protection Cir-
cuit
Switching-mode
Page 626
aps-group-id
aps:
group-id:
Label
Specifies the APS interface name (the APS group port).
Up — APS is administratively up.
Down — APS port is administratively down.
Up — APS port is operationally up.
Down — APS is operationally down.
Specifies the multi-chassis state.
Specifies the working circuit ID.
Specifies the physical port that acts as the protection circuit for this APS
group.
Specifies the active circuit.
Displays the value of the SONET/SDH K1 byte received or transmitted on
the protection circuit.
Displays the APS group name.
Displays the physical port that will act as the protection circuit for this APS
group.
Displays the switching mode of the APS group.
keyword
1 — 128
Description
7750 SR Interface Configuration Guide