Alcatel-Lucent 7750 Configuration Manual page 644

Interfaces
DDM Events
Configured Mode
Dot1Q Ethertype
QinQ Ethertype
Net. Egr. Queue
Pol
Encap Type
Active Alarms
Auto-negotiate
Alarm State
Collect Stats
Egress Rate
Egress Buf (Acc)
Egress Buf (Net)
Egress Pool Size
Ingress Buf
(Acc)
Page 644
Label
Enabled — DDM events are enabled
Disabled — DDM events are disabled
network — The port is configured for transport network use.
access — The port is configured for service access.
Indicates the Ethertype expected when the port's encapsulation type is
Dot1Q.
Indicates the Ethertype expected when the port's encapsulation type is QinQ.
Specifies the network egress queue policy or that the default policy is used.
Null — Ingress frames will not use any tags or labels to delineate a
service.
dot1q — Ingress frames carry 802.1Q tags where each tag signifies a
different service.
The number of alarms outstanding on this port.
True — The link attempts to automatically negotiate the link speed and
duplex parameters.
False — The duplex and speed values are used for the link.
The current alarm state of the port.
Enabled — The collection of accounting and statistical data for the
network Ethernet port is enabled. When applying accounting policies the
data by default will be collected in the appropriate records and written to the
designated billing file.
Disabled — Collection is disabled. Statistics are still accumulated by the
IOM cards, however, the CPU will not obtain the results and write them to
the billing file.
The maximum amount of egress bandwidth (in kilobits per second) that this
Ethernet interface can generate.
The access-buffer policy for the egress buffer.
The network-buffer policy for the egress buffer.
The amount of egress buffer space, expressed as a percentage of the
available buffer space that will be allocated to the port or channel for egress
buffering.
The access-buffer policy for the ingress buffer.
Description (Continued)
7750 SR Interface Configuration Guide