Alcatel-Lucent 7750 Configuration Manual page 401

Description The context used to define errored frame parameters including thresholds, and windows of received packets
to which the error count will be compared. An errored frame is counted when there is any frame error
detected by the Ethernet physical layer. This excludes jumbo frames above 9192 bytes which are dropped
prior to this function. The received packet count will be check every one second to see if the window has
been reached.
sd-threshold
Syntax sd-threshold errored-frames
Context config>port>ethernet>efm-oam>link-monitoring>errored-frame-period
Description
The option is used to define the number of errored frames within the configured window which indicates the
port has gone beyond an acceptable error rate and should be considered degraded. This is a first level warn-
ing that a port may be suspect. This generates an information log event message only and will be recorded
in the Port event index but has no port level actions when the error count is equal to or greater than the
threshold. This value must be lower than or equal to the sf-threshold value.
The no value of this option disables the sd-threshold
Default [no] sd-threshold
Parameters errored-frames — The number of errored frames within the configured window which indicates the port has
become degraded.
Values
sf-threshold
Syntax sf-threshold errored-frames
Context config>port>ethernet>efm-oam>link-monitoring>errored-frame-period
Description The option is used to define the number of frame errors within the configured window which indicates the
port has exceeded an acceptable error rate. A log event will be raised, and the port will be taken out of ser-
vice by default. Configuration options exist to take additional actions when the error rate exceeds the thresh-
old. These actions are defined using the local-sf-action configuration. This event can only be cleared
through manual intervention that affects the state of the port.
Parameters errored-frames — The number of errored frames within the configured window which indicates the port has
become unusable.
Values
Default
window
Syntax window packets
7750 SR Interface Configuration Guide
[1... 1,000,000]
[1... 1,000,000]
1
Interface Configuration
Page 401