Alcatel-Lucent 7750 Configuration Manual page 601

Off. All
Dro. All
For. All
Ing. Policer: 16
Off. All
Dro. All
For. All
===============================================================================
*A:Dut-T#
cflowd
Syntax
elmi
Syntax elmi
Context show
Description This command displays Ethernet Link Management Interface (eLMI) information.
ELMI Output — The following table describes eLMI output fields.
Link Status
T391
T392
N393
Rx Enq. Time
Rx Enq Msg
Rx Check Time
Rx Inv. SeqNum
Enq Timeouts
Tx Status Time
Tx Status Msg
7750 SR Interface Configuration Guide
:
:
:
Grp: QGIng1 (Stats mode: minimal)
:
:
:
Field
Status of the E-LMI protocol when the elmi mode is set to uni-n. Link
Status will indicate up if eLMI mode is set to "none".
pooling timer used by UNI-C. UNI-N will send the consecutive single
EVC asynchronous status messages every (T391/10) rounded to the
second interval.
Pooling verification timer for UNI-N
Status counter for UNI-N
Last time when a status enquiry message was received from UNI-C.
Number of status enquiry messages received.
Last time when a status enquiry E-LMI check message was received.
Counts the number of E-LMI messages received with invalid sequence
number.
Counts the number of T392 timer expired.
Last time when a status message was sent by UNI-N.
Number of status messages sent by UNI-N.
0
0
0
0
0
0
Description
Interface Configuration
0
0
0
0
0
0
Page 601