Alcatel-Lucent 7750 Configuration Manual page 736

Interfaces
Detailed LAG Output Fields
LAG ID
Adm
Port Threshold
Thres. Last
Cleared
Dynamic Cost
Configured
Address
Hardware Address
Hold-Time Down
LACP
LACP Transmit
Intvl
Selection Crite-
ria
MUX control
Number of sub-
groups
System ID
Admin Key
Oper Key
System Priority
Prtr System ID
Prtr Oper Key
Prtr System Pri-
ority
Page 736
Label
The LAG or multi-link trunk (MLT) that the port is assigned to.
Up — The LAG is administratively up.
Down — The LAG is administratively down.
If the number of available links is equal or below this number, the
threshold action is executed.
The last time that keepalive stats were cleared.
The OSPF costing of a link aggregation group based on the available
aggregated, operational bandwidth.
The base chassis Ethernet MAC address.
The hardware address.
The timer, in tenths of seconds, which controls the delay between
detecting that a LAG is down and reporting it to the higher levels.
Enabled — LACP is enabled.
Down — LACP is disabled.
LACP timeout signalled to peer.
Configured subgroup selection criteria.
Configured type of multiplexing machine control used in a LAG with
LACP in active/passive modes.
coupled — TX and RX activate together.
independent — RX activates independent of TX.
Total subgroups in LAG.
System ID used by actor in LACP messages.
Configured LAG key.
Key used by actor in LACP messages.
System priority used by actor in LACP messages.
System ID used by partner in LACP messages.
Key used by partner in LACP messages.
System priority used by partner in LACP messages.
Description
7750 SR Interface Configuration Guide