Figure 36: Channelized Oc-12 Port Structure - Alcatel-Lucent 7750 Configuration Manual

Configuring a Channelized OC-12-SFP Port
Figure 36
X
STS1-3/DS3-1.1
Y
DS1-1
Z
1/1/1.1.1.1.1
...
1/1/1.1.1.1.1
A
Channel-groups
The following describes an example to configure a channelized port on a 1-port channelized OC-
12-SFP MDA:
ALA-A>config# port 5/2/1
At this level you must choose the tributary.
12 MDA, you must provision the parent STS1-1 SONET path first.
A:ALA-A>config>port# sonet-sdh
A:ALA-A>config>port>sonet-sdh# path sts1-1.1
A:ALA-A>config>port>sonet-sdh>path# no shutdown
A:ALA-A>config>port>sonet-sdh>path# exit
The following displays the output:
A:ALA-A>config>port>sonet-sdh# info
----------------------------------------------
7750 SR Interface Configuration Guide
depicts the logic of the channelized OC-12 port configuration.
STS3-1 STS3-2
STS1-3/DS3-1.2
...
DS1-2 DS1-27 DS1-28
...
1/1/1.1.1.28.1
...
1/1/1.1.1.1.24 1/1/1.1.1.1.1
Channel-groups

Figure 36: Channelized OC-12 Port Structure

sonet-sdh
path sts1-1.1
no shutdown
exit
STS3-3 STS3-4
STS1-3/DS3-1.3
DS1-1
1/1/1.1.1.1.1
...
1/1/1.1.1.1.24 1/1/1.1.1.28.1
Channel-groups
en provisioning DS3 nodes on a channelized OC-
Wh
Interface Configuration
...
DS1-2 DS1-27 DS1-28
...
1/1/1.1.1.28.1
...
1/1/1.1.1.28.24 1/1/1.1.1.28.1
Channel-groups
1/1/1.1.1.28.24
MDA0022A
Page 211