Alcatel-Lucent 7750 Configuration Manual page 550

Interfaces
src-mac
Syntax src-mac ieee-address
no src-mac
Context config>redundancy>mc>peer>mcr>node>cv
Description This command specifies the source MAC address used for the Ring-Node Connectivity Verification of this
ring node.
A value of all zeroes (000000000000 H (0:0:0:0:0:0)) specifies that the MAC address of the system manage-
ment processor (CPM) is used.
Default no src-mac
Parameters
ieee-address — Specifies the source MAC address.
vlan
Syntax vlan [vlan-encap]
no vlan
Context config>redundancy>mc>peer>mcr>node>cv
Description This command specifies the VLAN tag used for the Ring-node Connectivity Verification of this ring node. It
is only meaningful if the value of service ID is not zero. A zero value means that no VLAN tag is config-
ured.
Default
no vlan
Parameters
vlan-encap — Specifies the VLAN tag.
Values
Page 550
vlan-encap: dot1q
qinq
qtag
qtag1
qtag2
qtag
qtag1.qtag2
0 — 4094
1 — 4094
0 — 4094
7750 SR Interface Configuration Guide