Alcatel-Lucent 7750 Configuration Manual page 359

Context config>port>ethernet>egress-scheduler-override
config>port>sonet-sdh>path>egress-scheduler-override
config>port>tdm>ds3>egress-scheduler-override
config>port>tdm>ds1>channel-group>egress-scheduler-override
config>port>tdm>e3
Description
This command overrides the maximum and CIR rate parameters for a specific priority level on the port or
channel's port scheduler instance. When the level command is executed for a priority level, the correspond-
ing priority level command in the port-scheduler-policy associated with the port is ignored.
The override level command supports the keyword max for the rate and cir parameter.
When executing the level override command, at least the rate or cir keywords and associated parameters
must be specified for the command to succeed.
The no form of this command removes the local port priority level rate overrides. Once removed, the port
priority level will use the port scheduler policies level command for that priority level.
Parameters priority-level — Identifies which of the eight port priority levels are being overridden.
Values
rate pir-rate — Overrides the port scheduler policy's maximum level rate and requires either the max key-
word or a rate defined in kilobits-per-second to follow.
Values
cir cir-rate — Overrides the port scheduler policy's within-cir level rate and requires either the max key-
word or a rate defined in kilobits-per-second to follow.
Values
max — removes any existing rate limit imposed by the port scheduler policy for the priority level allowing
it to use as much total bandwidth as possible.
max-rate
Syntax max-rate rate
no max-rate
Context configure>port>ethernet>egress-scheduler-override>level>rate
configure>port>ethernet>egress-scheduler-override
configure>port>sonet-sdh>path>egress-scheduler-override>level
configure>port>sonet-sdh>path>egress-scheduler-override
configure>port>tdm>ds1>channel-group>egress-scheduler-override>level
configure>port>tdm>ds1>channel-group>egress-scheduler-override
configure>port>tdm>ds3>egress-scheduler-override>level
configure>port>tdm>ds3>egress-scheduler-override
configure>port>tdm>e1>channel-group>egress-scheduler-override
configure>port>tdm>e3>egress-scheduler-override
Description This command overrides the max-rate parameter found in the port-scheduler-policy associated with the
port. When a max-rate is defined at the port or channel level, the port scheduler policies max-rate parameter
is ignored.
7750 SR Interface Configuration Guide
1 — 8
1 — 40000000, max
0— 40000000, max
Interface Configuration
Page 359