Alcatel-Lucent 7750 Configuration Manual page 749

queue-group
Syntax queue-group queue-group-name egress network instance instance-id [policer policer-id]
[egress-queue egress-queue-id] [interval seconds] [repeat repeat] [absolute | rate]
Context monitor
Description This command enables queue-group monitoring for the specified parameters.
port
Syntax atm [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>port
Description This command enables ATM port traffic monitoring.
Parameters interval seconds — Configures the interval for each display in seconds.
Default
Values
repeat repeat — Configures how many times the command is repeated.
Default
Values
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the
delta.
Sample Output
A:ALA-49# monitor port 9/1/1 atm interval 3 repeat 2 absolute
===============================================================================
Monitor ATM statistics for Port 9/1/1
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Octets
Cells
Unknown VPI/VCI Cells
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets
Cells
Unknown VPI/VCI Cells
-------------------------------------------------------------------------------
7750 SR Interface Configuration Guide
5 seconds
3 — 60
10
1 — 999
Interface Configuration
Input
0
0
0
0
0
0
Output
0
0
0
0
Page 749