Alcatel-Lucent 7750 Configuration Manual page 726

Interfaces
*A:mlppp_top#
atm
Syntax atm [detail]
Context show>multilink-bundle>ima
Description This command displays multilink bundle IMA ATM information.
Parameters detail — Displays detailed information.
Output Show Mutlilink-bundle IMA ATM Output — The following table describes show multilink-bundle
IMA ATM output fields..
Cell Mode
Configured VCs
Configured VTs
Configured mini-
mum VPI
Last Unknown
VPI/VCI
Mapping
Configured VPs
Configured IFCs
Sample Output
Mutlilink-Bundle IMA ATM Output Fields
A:NS052651098# show multilink-bundle bundle-ima-1/1.1 ima atm
=============================================================================
ATM Info for bundle-ima-1/1.1
=============================================================================
Cell Mode
Configured VCs
Configured VTs
Configured minimum VPI: 0
Last Unknown VPI/VCI
===============================================================================
ATM Bandwidth Info
===============================================================================
-------------------------------------------------------------------------------
Ingress CBR
Ingress RT-VBR
Ingress NRT-VBR
Ingress UBR
Page 726
Label
Displays the cell format (UNI or NNI) used on the ATM interface.
Displays the number of configured VCs.
Displays the number of configured VTs.
Displays the minimum VPI configured for this bundle.
Indicates the last unknown VPI/VCI that was received on this
interface.
Displays ATM cell mapping used on this interface: Direct or PLCP.
Displays the number of configured VPs.
Displays the number of configured IFCs.
: UNI
: 1
: 0
: none
kbps
: 15232
: 0
: 0
: 0
Description
Mapping
Configured VPs
Configured IFCs
%
100% Egress CBR
0% Egress RT-VBR
0% Egress NRT-VBR
0% Egress UBR
7750 SR Interface Configuration Guide
: Direct
: 0
: 0
kbps %
: 15232 100%
: 0 0%
: 0 0%
: 0 0%