Alcatel-Lucent 7750 Configuration Manual page 306

Interfaces
config>port>tdm>e1>channel-group
config>port>tdm>e3
config>lag
config>lag>link>map>profile
config>port>ethernet>eth-cfm>mep
config>card>fp>ingress>access>queue-group
config>card>fp>ingress>network>queue-group
Description This command creates a text description for a configuration context to help identify the content in the con-
figuration file.
The no form of this command removes any description string from the context.
Default No description is associated with the configuration context.
Parameters
long-description-string — The description character string. Strings can be up to 160 characters long com-
posed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, etc.),
the entire string must be enclosed within double quotes.
shutdown
Syntax [no] shutdown
Context config>card
config>card>mda
config>interface-group-handler
config>port
config>port>ethernet
config>port>sonet-sdh>path
config>port>tdm>ds1
config>port>tdm>ds1>channel-group
config>port>tdm>ds3
config>port>tdm>e1
config>port>tdm>e1>channel-group
config>port>tdm>e3
config>port>multilink-bundle>ima>test-pattern-procedure
config>port>sonet-sdh>path>atm>ilmi
config>lag
config>port>ethernet>eth-cfm>mep
config>port>ethernet>efm-oam
config>redundancy>multi-chassis>peer
config>redundancy>mc>peer>mcr
config>redundancy>mc>peer>mc-lag
config>redundancy>mc>peer>mcr>ring
config>redundancy>mc>peer>mcr>node>cv
config>redundancy>multi-chassis>peer>sync
Description This command administratively disables an entity. When disabled, an entity does not change, reset, or
remove any configuration settings or statistics.
Page 306 7750 SR Interface Configuration Guide