Bc412 Set Length 1; Bc412 Set Length 2 - Datalogic Gryphon I GFE4500 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

BC412 Set Length 1

This feature specifies one of the bar code lengths for "
. Length 1 is the minimum label length if in Variable Length Mode, or the first fixed
183
length if in Fixed Length Mode. Length includes the bar code's data characters only.
The length can be set from 01 to 50 characters. See "
detailed programming instructions.
Select BC412 Length 1 Setting
$CBCL1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

BC412 Set Length 2

This feature specifies one of the bar code lengths for "
. Length 2 is the maximum label length if in Variable Length Mode, or the second
183
fixed length if in Fixed Length Mode. Length includes the bar code's data characters
only.
The length can be set from 01 to 50 characters. A setting of 00 specifies to ignore this
length (only one fixed length). See "
gramming instructions.
Select BC412 Length 2 Setting
$CBCL2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
184
GRYPHON™ GFS4500
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.

Length 1 = 01 (one character)
Set Length 2" on page 242
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.

Length 2 = 50 (50 characters)
1D SYMBOLOGIES
BC412 Length Control" on page
Set Length 1" on page 241
Appendix E, Keypad represent-
CANCEL
BC412 Length Control" on page
for more detailed pro-
Appendix E, Keypad represent-
CANCEL
for more