Bc412 Set Length 1 - Datalogic PowerScan 9100 Series Product Reference Manual

Enter/Exit Programming Mode

BC412 Set Length 1

This feature specifies one of the bar code lengths for
Length 1 is the minimum label length if in
fixed length if in
and data characters. The length can be set from 2 to 50 characters.
Table 16
detailed instructions on setting this feature.
Table 24. BC412 Length 1 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 11 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
Select BC412 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to
abort and not save the entry string. You can
then start again at the beginning.
198
Fixed Length
provides some examples for setting Length 1. See
EXAMPLES
02 Characters
'0' and '2'
04 = Length 1 is 4 Characters
DEFAULT
Variable Length
Mode. Length includes the bar code's check
07 Characters 15 Characters
'0' and '7' '1' and '5'
To configure this feature, scan the ENTER/EXIT
bar code above, then the bar code at left fol-
lowed by digits from the Alphanumeric charac-
Appendix D, Keypad
ters in
desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
PowerScan™ PD9130/PBT9100/PM9100
BC412 Length Control.
Mode, or the first
page 297 for
50 Characters
'5' AND '0'
representing your