Code 93 Set Length 1 - Datalogic QuickScan I QD24 Series Product Reference Manual

Code 93 Set Length 1

Specifies one of the bar code lengths for
Variable Length Mode, or the first fixed length if in
characters only. The length can be set from 01 to 50 characters.
Table 19 provides some examples for setting Length 1. See
Table 19. Code 93 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CC9L1
Select Code 93 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Code 93 Length
01 Characters
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 93 LENGTH 1 SETTING
'0' and '1'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Control. Length 1 is the minimum label length if in
Fixed Length Mode. Length includes the bar code's data
page 217 for detailed instructions on setting this feature.
EXAMPLES
07 Characters
'0' and '7'
~
01 = Length 1 is 1 Character
Enter/Exit Programming Mode
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL
161