Code 93 Set Length 1; Code 93 Set Length 2 - Datalogic Gryphon 2D Series Reference Manual

CODE 93

Code 93 Set Length 1

This feature specifies one of the bar code lengths for "
. Length 1 is the minimum label length if in Variable Length Mode, or the first fixed
192
length if in Fixed Length Mode. Length includes the bar code's check and data charac-
ters.
The length can be set from 1 to 50 characters. See "
detailed programming instructions.
Select Code 93 Length 1 Setting
$CC9L1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Code 93 Set Length 2

This feature specifies one of the bar code lengths for "
. Length 2 is the maximum label length if in Variable Length Mode, or the second
192
fixed length if in Fixed Length Mode. The length includes the bar code's check and data
characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to ignore this
length (only one fixed length). See "
gramming instructions.
Select Code 93 Length 2 Setting
$CC9L2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.

Length 1 = 01 (one character)
Set Length 2" on page 294
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.

Length 2 = 50 (50 characters)
ENTER/EXIT PROGRAMMING MODE
Code 93 Length Control" on page
Set Length 1" on page 293
Appendix D, Keypad represent-
CANCEL
Code 93 Length Control" on page
for more detailed pro-
Appendix D, Keypad represent-
CANCEL
PRODUCT REFERENCE GUIDE
for more
193