Msi Set Length 1; Msi Set Length 2 - Datalogic Gryphon 2D Series Reference Manual

MSI

MSI Set Length 1

This feature specifies one of the bar code lengths for "
Length 1 is the minimum label length if in Variable Length Mode, or the first fixed length
if in Fixed Length Mode. Length includes the bar code's data characters only.
The length can be set from 1 to 50 characters. See "
detailed programming instructions.
Select MSI Length 1 Setting
$CMSL1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

MSI Set Length 2

This feature specifies one of the bar code lengths for "
Length 2 is the maximum label length if in Variable Length Mode, or the second fixed
length if in Fixed Length Mode. The length includes the bar code's data characters only.
The length can be set from 1 to 50 characters. A setting of 00 specifies to ignore this
length (only one fixed length). See "
gramming instructions.
Select MSI Length 2 Setting
$CMSL2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.

Length 1 = 01 (one character)
Set Length 2" on page 294
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.

Length 2 = 50 (50 characters)
ENTER/EXIT PROGRAMMING MODE
MSI Length Control" on page 196
Set Length 1" on page 293
Appendix D, Keypad represent-
CANCEL
MSI Length Control" on page 196
for more detailed pro-
Appendix D, Keypad represent-
CANCEL
PRODUCT REFERENCE GUIDE
.
for more
.
197