Msi Set Length 1 - Datalogic PowerScan 9500 Series Product Reference Manual

Enter/Exit Programming Mode

MSI Set Length 1

This feature specifies one of the bar code lengths for
Length 1 is the minimum label length if in
fixed length if in
characters only. The length can be set from 01 to 50 characters.
Table 22
detailed instructions on setting this feature.
Table 22. MSI Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT MSI LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CMSL1
Select MSI Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
166
Fixed Length
provides some examples for setting Length 1. See
EXAMPLES
01 Characters
'0' and '1'
01 = Length 1 is 1 Character
DEFAULT
Variable Length
Mode. Length includes the bar code's data
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
PowerScan™ PD9530/PBT9500/PM9500
MSI Length Control.
Mode, or the first
page 283 for
50 Characters
'5' AND '0'