Fisher FIELDVUE DVC6200f Instruction Manual page 79

Instruction Manual
D103412X012
Travel Open
D Travel Open Alert—This alert is active if the Travel is greater than the Travel Open Alert Point.
D Travel Open Alert Enable—When enabled Travel Open Alert Enable activates the Travel Open Alert.
D Travel Open Alert Point—Travel Open Alert Point (TVL_OPEN_ALRT_PT [77.8]) is the value of the travel in percent
(%) or ranged travel, which, when exceeded, sets the Travel Open Alert.
D Travel Open Deadband—Travel Open Deadband (TVL_OPEN_DB [77.9]) is the travel in percent (%) of ranged travel
required to clear a Travel Open alert, once it has been set.
Travel Closed
This alert is active if the Travel is lower than the Travel Closed Alert Point.
D Travel Closed Alert—This alert is active is the Travel goes below the Travel Closed Alert Point.
D Travel Closed Alert Enable—When enabled Travel Closed Alert Enable activates the Travel Closed Alert.
D Travel Closed Alert Point—The Travel Closed Alert is set when the value of the travel, in percent (%) of ranged travel,
goes below the Travel Closed Alert Point (TVL_CLOSED_ALRT_PT [77.10]).
D Travel Closed Deadband—Travel Closed Deadband (TVL_CLOSED_DB [77.11]) is the travel in percent (%) of ranged
travel required to clear a Travel Closed alert, once it has been set.
Proximity
D Proximity Hi Hi Alert—This alert is active if the Travel is within the detection band set by the Travel Hi Hi Alert Point
and the Travel Hi Hi Deadband.
D Proximity Hi Hi Alert Enable—When enabled Proximity Hi Hi Alert Enable activates the Proximity Hi Hi Alert.
D Proximity Hi Alert—This alert is active if the Travel is within the detection band set by the Travel Hi Alert Point and
the Travel Hi Deadband.
D Proximity Hi Alert Enable—When enabled Proximity Hi Alert Enable activates the Proximity Hi Alert.
D Proximity Lo Alert—This alert is active if the Travel is within the detection band set by the Travel Lo Alert Point and
the Travel Lo Deadband.
D Proximity Lo Alert Enable—When enabled Proximity Lo Alert Enable activates the Proximity Lo Alert.
D Proximity Lo Lo Alert—This alert is active if the Travel is within the detection band set by the Travel Lo Lo Alert Point
and the Travel Lo Lo Deadband.
D Proximity Lo Lo Alert Enable—When enabled Proximity Lo Lo Alert Enable activates the Proximity Lo Lo Alert.
Detailed Setup—Transducer Block
July 2013
77