Fisher FIELDVUE DVC6200f Instruction Manual page 61

Instruction Manual
D103412X012
Table 4‐3. Resource Block Parameter Definitions (Continued)
Label
PARAMETER_NAME
Write Alarm
WRITE_ALM
UNACKNOWLEDGED
ALARM_STATE
TIME_STAMP
SUBCODE
VALUE
ITK Version
ITK_VER
Private Label Distributor
DISTRIBUTOR
Device String Array
DEV_STRING
Function Block Options
FB_OPTIONS
Diagnostic Options
DIAG_OPTIONS
Miscellaneous Options
MISC_OPTIONS
Firmware Revision
FIRMWARE_REVISION
FIRMWARE_REV_MAJOR
FIRMWARE_REV_MINOR
FIRMWARE_REV_BUILD
IO_FIRMWARE_REV
DIAG_CAL_REV
FIRMWARE_REV_ALL
Hardware Revision
HARDWARE_REV
Index RO /
Mode
Number RW
40
0=Undefined
40.1 RW ALL 1=Acknowledged
2=Unacknowledged
0=Undefined
1=Clear reported
40.2 RO NA 2=Clear not reported
3=Active reported
4=Active not reported
40.3 RO NA
40.4 RO NA
40.5 RO NA
41 RO N/A
Extended Parameters
42 RO NA
43
Bits
0: AO
1: DO
2: AI
44 RO 3: DI
4: PID
5: ISEL
6: OS
7: MAI
1=FD Fieldbus
Diagnostics
2=AD Advanced
45 RO NA
Diagnostics
3=PD Performance
Diagnostics
0: Software Download
10: Travel Control
Capable
46 RO NA
11: Pressure Control
Capable
12: Fallback Capable
47
47.1 RO NA 0-255
47.2 RO NA 0-255
47.3 RO NA 0-255
47.4 RO NA 0-255
47.5 RO NA 0-255
47.6 RO NA XX.XX.XX
Hardware revision
48 RO NA
number
-Continued-
Detailed Setup—Resource Block
Initial
Range
Value
Data Type: DS‐72
This alarm is generated when Unlocked in the
WRITE_LOCK parameter is set. This alarm has a
0=Undefined
priority of WRITE_PRI. For a WRITE_ALM to be
broadcast to the host the following conditions
must be met:
0=Undefined
setup
0
for Write Alarm must be clear.
0
0
Data Type: Unsigned16
Major version of ITK test this device has been
*
tested to. *Initial value depends on the revision
of the DVC6200f.
Data Type: Unsigned32
0x5100
Private label distributor
Unused extended parameter.
Data Type: Bit String
0=disabled
1=enabled
All options Indicates which function block licensing options
enabled are enabled. One bit for each block type that is
supported. Unlicensed blocks cannot be
scheduled and the Actual block mode will
remain OOS.
Data Type: Enum
Indicates which diagnostics licensing options are
*
enabled. *Initial value depends on the licensed
DVC6200f options.
FD
0: 1
Data Type: Bit String
10: 1
0=Disable
11: 1
AD/PD 1=Enable
0: 1 Indicates which miscellaneous licensing options
10: 1 are enabled.
11: 1
12: 1
Data Type: Uint8
*
Describes software revision information. This is
*
the revision of the firmware that is currently in
use.
*
*Initial value depends on revision of DVC6200f.
*
*
Data Type: Visible String
Describes software revision information.
The range of this parameter consists of 47.1
*
through 47.5 values, converted to text, and
linked together.
*Initial value depends on revision of DVC6200f
Data Type: Uint8
Factory Set Describe electronic hardware revision
information.
Description
The feature Reports must be selected
Alert communication with the host must be
In the ALARM_SUM parameter, the disable bit
WRITE_PRI must be greater than 1.
July 2013
59