Fisher FIELDVUE DVC6200f Instruction Manual page 171

Instruction Manual
D103412X012
Table 4‐48. Output Splitter Function Block Parameter Definitions (Continued)
Label
PARAMETER_NAME
Block Alarm
BLOCK_ALM
UNACKNOWLEDGED
ALARM_STATE
TIME_STAMP
SUBCODE
VALUE
View Lists
View lists allow the values of a set of parameters to be accessed at the same time. Views 1 and 2 contain operating
parameters and are defined by the Fieldbus Foundation. View 3 contains dynamic parameters and View 4 contains
static parameters with configuration and maintenance information. Views 3 and 4 are defined by the manufacturer.
Table 4‐49. OS Function Block, View 1
Index Number
1 ST_REV
5.1 MODE_BLK.TARGET_MODE
5.2 MODE_BLK.ACTUAL_MODE
5.3 MODE_BLK.PERMITTED_MODE
5.4 MODE_BLK.NORMAL_MODE
6 BLOCK_ERR
7 SP
8 OUT_1
9 OUT_2
14 CAS_IN
Table 4‐50. OS Function Block, View 2
Index Number
1 ST_REV
10 OUT_1_RANGE
11 OUT_2_RANGE
12.1 GRANT_DENY.GRANT
12.2 GRANT_DENY.DENY
Index RO / Block
Number RW Mode
24
0: Undefined
1: Acknowledged
24.1 RW N/A
2: Unacknowledged
0: Undefined
1: Clear reported
2: Clear not reported
24.2 RO N/A
3: Active reported
4: Active not
reported
24.3 RO N/A
24.4 RO N/A
24.5 RO N/A
Parameter
Parameter
Initial
Range
Value
Data Type: DS‐72
The block alarm is used for all configuration, hardware,
connection failure, or system problems in the block. The
cause of the alert is entered in the subcode field.
Table 4‐51. OS Function Block, View 3
Index Number
1
5.1
5.2
5.3
5.4
6
7
8
9
14
15
19
20
Table 4‐52. OS Function Block, View 4
Index Number
1
3
4
13
16
17
18
21
Detailed Setup—OS Function Block
Description
Parameter
ST_REV
MODE_BLK.TARGET_MODE
MODE_BLK.ACTUAL_MODE
MODE_BLK.PERMITTED_MODE
MODE_BLK.NORMAL_MODE
BLOCK_ERR
SP
OUT_1
OUT_2
CAS_IN
BKCAL_OUT
BKCAL_1_IN
BKCAL_2_IN
Parameter
ST_REV
STRATEGY
ALERT_KEY
STATUS_OPTS
IN_ARRAY
OUT_ARRAY
LOCKVAL
BAL_TIME
July 2013
169