Configuring The Transit Node For A Static Lsp; Configuring The Egress For A Static Lsp - Huawei AR1200 Series Configuration Manual - Mpls

Huawei AR1200 Series Enterprise Routers
Configuration Guide - MPLS
To modify the destination destination-address, nexthop next-hop-address, outgoing-
interface interface-type interface-number, or out-label out-label, run the static-lsp ingress
command to set a new value. There is no need to run the undo static-lsp ingress command
before changing a configured value.
----End

1.3.5 Configuring the Transit Node for a Static LSP

To set up a static LSP, configure the transit node manually.
Context
Perform the following steps on the LSR to be configured as a transit node:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
static-lsp transit lsp-name incoming-interface interface-type interface-number in-
label in-label { nexthop next-hop-address | outgoing-interface interface-type
interface-number }
The LSR is configured as the transit node on the specified LSP.
To modify the incoming-interface interface-type interface-number, in-label in-label-value,
next-hop-address, outgoing-interface interface-type interface-number, or out-label out-label-
value, run the static-lsp transit command to set a new value. There is no need to run the undo
static-lsp transit command before changing a configured value.
----End

1.3.6 Configuring the Egress for a Static LSP

To set up a static LSP, configure the egress manually.
Context
Perform the following steps on the LSR to be configured as the egress:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
static-lsp egress lsp-name incoming-interface interface-type interface-number in-
label in-label [ lsrid ingress-lsr-id ]
The LSR is configured as the egress on the specified LSP.
Issue 01 (2011-12-30)
*
out-label out-label
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Static LSPs Configuration
5