Source3 <Name; Calc Data Elements; Calculate <Item List - Keithley 2500 User Manual

Models 2500 and 2502 User's Manual
SOURce3 <name>
:FORMat:SOURce3 <name>
Parameters
Query
Description

CALC data elements

CALCulate <item list>
:FORMat:ELEMents:CALCulate <item list>
Parameters
NOTE
Query
Description
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
<name> = ASCii
HEXadecimal
OCTal
BINary
:SOURce3?
This command controls the response format for all
CALC7:XXXX:SOUR3 and SOUR3:TTL queries in a manner similar
to formats set by the FORM:SREG command. See
systems," and "SOURce subsystem," page 17-60,
<item list> = CALCulate
TIME
STATus
Each item in the list must be separated by a comma (for example, :CALCulate
CALC,TIME,STAT).
:CALCulate?
This command allows you specify the data elements returned with the
CALC1:DATA? through CALC7:DATA? queries. With CALC speci-
fied, the corresponding CALC1 through CALC7 element will be
included in the response. With TIMe or STATus specified, timestamp
and status information will be returned with the queries. See
subsystems," page 17-22,
CALC1 through CALC7 elements. See also
page 17-46, for a description of TIME and STATus information.
SCPI Command Reference
Set SOUR3 and TTL response formats
ASCII format
Hexadecimal format
Octal format
Binary format
Query response format
Set CALC data elements
Include CALC1 to CALC7 data
Include timestamp
Include status information
Query CALC data element list
for a complete description of the various
"Data elements,"
17-49
"Calculate sub-
topics for details.
"Calculate