Setting Speed; Speed-Accuracy Menu - Keithley 2500 User Manual

6-6 Range, Digits, Speed, and Filters

Setting speed

Speed is set from the SPEED ACCURACY MENU and is structured as follows. Use
Section

SPEED-ACCURACY MENU

Press SPEED or CONFIG SPEED to display the menu
• FAST — Sets speed to 0.01 PLC and sets display resolution to 3
• MED — Sets speed to 0.10 PLC and sets display resolution to 4
• NORMAL — Sets speed to 1.00 PLC and sets display resolution to 5
• HI ACCURACY — Sets speed to 10.00 PLC and sets display resolution to 6
• OTHER — Use to set speed to any PLC value from 0.01 to 10. Display resolution is
not changed when speed is set with this option.
NOTE
Figure 6-1
Speed configuration menu tree
Fast
(0.01PLC,
3
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
1, "Rules to navigate menus,"
The SPEED setting is global and affects both channels. After setting speed, dis-
play resolution for the single-channel display mode can be changed using the
DIGITS key.
Med
(0.10PLC,
Digits) 4 Digits)
Models 2500 and 2502 User's Manual
to check and/or change the speed setting.
(Figure
Speed
Normal HI Accuracy
(1.00PLC, (10PLC,
5 Digits) 6 Digits)
6-1).
digits.
digits.
digits.
digits.
Other
(Set Speed
0.01 to 10PLC)