Keithley 2500 User Manual page 278

17-12 SCPI Command Reference
Table 17-5 (continued)
SENSe command summary
Command
:SENSe2
:CURRent[:DC]
:RANGe
[:UPPer] <n>
[:UPPer]?
:AUTO <b>
:AUTO?
:ULIMit <n>
:ULIMit?
:LLIMit <n>
:LLIMit?
:NPLCycles <n>
:NPLCycles?
:AVERage
:COUNt <n>
:COUNt?
[:STATe] <b>
[:STATe]?
:TCONtrol <name>
:TCONtrol?
:ADVanced
:NTOLerance <NRf>
:NTOLerance?
[:STATe] <b>
[:STATe]?
:MEDian
:RANK <NRf>
:RANK?
[:STATe] <b>
[:STATe]?
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Description
Sense 2 subsystem to control channel 2 measurement:
Path to configure current:
Configure measurement range:
Select range by specifying the expected
current reading; 0 to ±21e-3.
Query range.
Enable or disable auto range.
Query auto range.
Set auto ranging upper limit (-0.021 to 0.021).
Query auto ranging upper limit
Set auto ranging lower limit (-0.021 to 0.021).
Query auto ranging lower limit.
Specify integration rate (in line cycles): 0.01
to 10.
Query integration rate.
Path to configure moving and repeat filters:
Specify filter count; 1 to 100.
Query filter count.
Enable or disable digital filter.
Query state of digital filter.
Select filter control (MOVing or REPeat).
Query filter control mode.
Configure the advanced filter:
Set filter noise window (in %); 0 to 105.
Query filter noise window setting.
Enable or disable advanced filter.
Query state of advanced filter.
Configure and control the median filter:
Specify median filter rank; 1 to 5.
Query median filter rank.
Enable or disable median filter.
Query state of median filter.
Models 2500 and 2502 User's Manual
Default
parameter SCPI
2e-4
ON
2e-2
2e-9
1
10
OFF
REPeat
5
OFF
1
OFF