Spacing <Name; Start <N; Stop <N - Keithley 2500 User Manual

Models 2500 and 2502 User's Manual
SPACing <name>
:SOURce[1]:SWEep:SPACing <name>
:SOURce2:SWEep:SPACing <name>
Parameters
Query
Description
STARt <n>
STOP <n>
:SOURce[1]:VOLTage:STARt <n>
:SOURce[1]:VOLTage:STOP <n>
:SOURce2:VOLTage:STARt <n>
:SOURce2:VOLTage:STOP <n>
Parameters
Query
Description
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
With AUTO selected, the Model 2500 will automatically go to the most
sensitive source range for each source level in the sweep. For front panel
operation, this is the AUTO RANGE option.
With FIXed selected, the source remains on the range that it is presently
on when the sweep is started. For sweep points that exceed the source
range capability, the source will output the maximum level for that
range. For front panel operation, this is the FIXED option.
<name> = LINear
LOGarithmic
:SPACing?
These commands are used to select the scale for the sweep. With LINear
selected, the source and measure points in the sweep will be performed
on a linear scale. With LOGarithmic selected, the source and measure
points will be performed on a logarithmic scale.
<n> = -100 to 100
DEFault
MINimum
MAXimum
:STARt?
:STARt? DEFault
:STARt? MINimum
:STARt? MAXimum
:STOP?
:STOP? DEFault
:STOP? MINimum
:STOP? MAXimum
These commands are used to specify the start and stop levels for a
sweep. If using a fixed (manual) source range, the sweep will be per-
formed using a source range that will accommodate all source values
SCPI Command Reference
Select scale for source 1 sweep
Select scale for source 2 sweep
Linear scale
Logarithmic scale
Query scale for sweep
Specify source 1 start voltage level
Specify source 1 stop voltage level
Specify source 2 start voltage level
Specify source 2 stop voltage level
Set source level (volts)
0V
-100V
+100V
Query start level for sweep
Query *RST default level
Query lowest allowable level
Query highest allowable level
Query start level for sweep
Query *RST default level
Query lowest allowable level
Query highest allowable level
17-67